Select Smart Home Sensor
Click on the sensor to go to the paring instructions:
Shelly BLU H&T
BLU H&T Product Page
- Remove the sensor from its box.
- Click on Start on the Wellness Hub.
- Pull the plastic tab from the sensor.
- The sensor should appear in the list of smart home devices in the Wellness Hub UI.
- If the sensor does not appear in the list, press and hold the button on the sensor for 10 seconds then release. The sensor will go into pairing mode and should appear in the smart home device list.
- Select the sensor that you want to pair and configure.
- The Wellness Hub will connect to the selected Smart Home sensor.
If the Wellness Hub stays on the Connecting to sensor screen for more the 10 seconds then remove the rear cover from the BLU H&T sensor, remove the battery then re-insert it. After about 5 seconds the BLU H&T sensor should pair. Put the rear cover back on the BLU H&T sensor.
- Select the location where the sensor will be placed.
- Select the device name for the sensor.
- The sensor location and device name will be displayed. The sensor has been paired to the Wellness Hub.
- You can add another smart home sensor now or click on Done to go back to the Settings screen.
Return to Pairing Smart Some Sensors article.
Shelly BLU Door/Window
BLU Door/Window Product Page
- Remove the sensor from its box.
- Click on Start on the Wellness Hub.
- Pull the plastic tab from the sensor.
- The sensor should appear in the list of smart home devices in the Wellness Hub UI.
- If the sensor does not appear in the list, press and hold the button on the sensor for 10 seconds then release. The sensor will go into pairing mode and should appear in the smart home device list.
- Select the sensor that you want to pair and configure.
- The Wellness Hub will connect to the selected Smart Home sensor.
If the Wellness Hub stays on the Connecting to sensor screen for more the 10 seconds then remove the cover from the BLU Door/Window sensor, remove the battery then re-insert it. After about 5 seconds the Door/Window sensor should pair. Put the cover back on the BLU Door/Window sensor.
- Select the location where the sensor will be placed.
- Select the device name for the sensor.
- The sensor location and device name will be displayed. The sensor has been paired to the Wellness Hub.
- You can add another smart home sensor now or click on Done to go back to the Settings screen.
Return to Pairing Smart Some Sensors article.
Shelly BLU Motion
BLU Motion Product Page
- Remove the sensor from its box.
- Remove the back off the sensor. You will see the battery and small switch.
- Click on Start on the Wellness Hub.
- Press and hold the small button for 10 seconds. This puts the sensor into pairing mode.
- The sensor will appear in the list of smart home devices in the Wellness Hub UI almost immediately. Please keep the button pressed on the sensor for the full 10 seconds.
- The sensor will flash blue when it is in pairing mode.
- Select the sensor that you want to pair and configure.
- Select the location where the sensor will be placed.
- Select the device name for the sensor.
- The sensor location and device name will be displayed. The sensor has been paired to the Wellness Hub.
- You can add another smart home sensor now or click on Done to go back to the Settings screen.
Return to Pairing Smart Some Sensors article.
Shelly Smart Plug
| Shelly Plus Plug UK | Shelly Plug US Gen4 |
Plug Plus UK Product Page
Plug US Gen4 Product Page
- Remove the smart plug from its box.
- Plug the smart plug into a power socket.
- Use the Shelly App on a smartphone connected to the same Wi-Fi network as the Wellness Hub to connect the device to the home network. Instruction for using the Shelly App can be located here.
- Click Start on the Wellness Hub.
- The sensor should appear in the list of smart home devices in the Wellness Hub UI.
- Select the smart plug that you want to pair and configure.
- Select the room where the smart plug will be placed.
- Select the device name for the smart plug.
- The smart plug location and device name will be displayed. The smart plug has been paired to the Wellness Hub.
- The name of the smart plug that is displayed will depend on the actual model paired:
Model Display Name Shelly Plug Plus UK Shelly - SNPL00112UK Shelly Plug US Gen4 Shelly - S4PL-00116US
- You can add another smart home sensor now or click on Done to go back to the Settings screen.
Return to Pairing Smart Some Sensors article.