Use the Quick Start Guide, included with your Wellness Hub, to get started. Refer to this guide for details as necessary. An unboxing video is also available.
Tip: If your TV is wall-mounted, connect all cables to the Wellness Hub before placing it on the TV, then connect the other ends of the cables as needed.
Connect the included HDMI cable to the TO TV port on the back of the Wellness Hub, and the other end to an open HDMI port on your TV.
(optional) If you have a set-top box or other video device used to watch TV, connect an HDMI cable to the INPUT port on the back of the Wellness Hub, and the other end to the HDMI output port on the set-top box or equivalent device.
(optional) If you are using an Ethernet connection instead of Wi-Fi, connect an Ethernet cable (not included) to the Ethernet (<ยทยทยท>) port on the back of the Wellness Hub, and the other end to an open Ethernet port on your home router.
Connect one end of the included USB-C cable to the POWER port on the back of the Wellness Hub, and the other end to the included power supply.
Note: The USB-C cable is 1.8m (6 feet) long. If you need an extension cord to reach a power outlet, use the shortest cord possible.-
Open the double hinge on the Wellness Hub, and place it on top of the TV. You can adjust the hinge to angle the Wellness Hub as needed. Make sure the Wellness Hub is secure.
If you prefer to place the Wellness Hub on a tabletop, leave the hinge folded underneath the Wellness Hub. Place it as close to the TV as possible.
Wellness Hub First-Time Install
If the Wellness Hub is not powered up, plug it in to begin the first-time installation (the Wellness Hub has no power switch, and should be powered up at all times).
Use your TV remote to select the HDMI port that the Wellness Hub is attached to.
Follow the prompts on the screen, using the HomeSight Remote Control.